Intel
®
Storage System SSR316MJ2 Cable Kit
45
Installing I
2
C Cables in the System
A.
Unpack the new I
2
C Cables that you received in your Intel
®
FMJCABLES Kit. Carefully re-
connect the I
2
C Cable connector labeled JP4 to its header on the backplane board. Carefully re-
connect I
2
C Cable connector labeled SL2J6 to its header in the HBA Card set. See Figure 35.
B.
Carefully re-connect the I
2
C Cable connector labeled JP6 to its header on the backplane board.
Carefully re-connect I
2
C Cable connector labeled SL3J6 to its header in the HBA Card set See
Figure 35.
C.
Carefully re-connect the I
2
C Cable connector labeled JP7 to its header on the backplane board.
Carefully re-connect I
2
C Cable connector labeled SL4J6 to its header in the HBA Card set.
Route the I
2
C Cables along the side of the chassis in the same way that the original I
2
C Cables
were routed. See Figure 35.
A
B
C
A
B
C
Figure 35. Installing I
2
C Cables