Intel
®
Storage System SSR316MJ2 Cable Kit
49
Re-seat Front Panel Board Cables
Once you have inserted and attached the new backplane board in your system, re-seat the front
panel board cables. Complete the following steps.
A.
Re-seat the Front Panel Cable labeled J1 into its connector receptacle on the front panel board.
See Figure 39.
B.
Re-seat the Secondary IDE Cable labeled J3 into its connector receptacle on the front panel
board. See Figure 39.
C.
Re-seat the Primary IDE Cable labeled J5 into its connector receptacle on the front panel board.
See Figure 39.
D.
Re-seat the front panel power connector into its connector receptacle on the front panel board.
See Figure 39.
NOTE:
The color of the mesh sheath of the Primary IDE Cable is
blue.
The blue Primary IDE Cable connects to the blue Front Panel Board
connector receptacle. The color of the mesh sheath of Secondary IDE
Cable is
white. The white Primary IDE Cable connects to the grey Front
Panel Board connector receptacle. The color of the mesh sheath of Front
Panel Cable is black. The black Primary IDE Cable connects to the black
Front Panel Board connector receptacle.
C
B
A
D
Figure 39.
Re-seating Front Panel Board Cables