13
Removing the Front Bezel
If your server chassis includes a front bezel, follow these steps to remove it from
the chassis:
1. Unlock the bezel.
2. Pull out the left side of the bezel from the rack handle (see letter
A
).
3. Rotate the left side of the bezel out away from the chassis to release the
latches on the right side from the rack handle (see letter
B
).
Figure 17. Removing the Front Bezel
Installing the Front Bezel
Note:
Before installing the front bezel, you must install the rack handles.
1. Lock the right side of the bezel to the rack handle (see letter
A
).
2. Rotate the left side of the bezel towards the chassis and press the left side
of the bezel into the rack handle until it clicks into place (see letter
B
).
3. Lock the bezel.
Figure 18. Installing the Front Bezel
AF006421
A
B
AF006422
B
A
