Chapter 3 – Changing the Gateway Settings
24
Opening the gateway configuration software
The configuration software for the gateway resides inside
the gateway, not on the Internet.
Step-by-step
1
Type the following Internet address into your Web
browser:
http://192.168.0.10.
or
Go to
Start > Programs > Intel AnyPoint > Intel
Wireless Gateway 1210 > Network Setup
, and then
click
Yes
when asked if you want to change the
gateway settings.
The following appears.
2
Enter your user name and password and then click
OK
.
The following appears.
user_guide_rg1210.book Page 24 Monday, April 22, 2002 2:20 PM