Intel
©
LB440GX 2U Rack Server Chassis TPS Rev 1.0
15
10 Supported Intel Server Boards
The following is a summary of the feature sets for Intel server boards supported by the Intel
LB440GX 2U rack server chassis. Please refer to the appropriate server board Technical Product
Specification for greater detail.
10.1 Intel
DP Server Board
§
Support for Single or Dual Pentium
®
II processors of identical speed and stepping, current
revision
§
Designed around the Intel
®
440GX AGPSet, PIIX4e, I/O APIC devices for full MPS 1.4 compliance.
§
100MHz System Bus (Front Side Bus)
§
Support for up to 2 GB 100MHz “PC/100” compliant registered or 1GB of unbuffered ECC or Non-
ECC SDRAM DIMMs (4 sites)
§
Dual Peer PCI buses providing 6 PCI slots.
§
Adaptec* AIC-7896 Dual function PCI SCSI controller providing Ultra2 (LVDS) wide and Ultra
wide SCSI channels. Support for Adaptec ARO-1130U2 RAID
Port*
“zero channel” RAID
controller
.
§
Intel
®
82559 PCI 10/100Mbit Ethernet controller with integrated physical layer. Onboard RJ-45
Network connector.
§
Cirrus Logic* GD5480 PCI SVGA graphics controller, 2MB of Synchronous Graphics memory
(SGRAM)
§
PCI IDE controller (in PIIX4E) providing dual independent Ultra DMA/33 IDE interfaces, each able
to support 2 IDE drives.
§
Compatibility I/O device integrating floppy, dual serial and parallel ports, all connectors provided.
§
Universal Serial Bus (USB) support with two USB connectors.
§
Integration of server management features, including thermal, voltage, fan, and chassis
monitoring into one controller. Emergency Management Port (EMP) feature. Introducing Platform
Event Paging (PEP) Feature enabling remote notification of significant server management
events.
§
Flash BIOS support for all of the above.
