background image

72

Intel

® 

 Modular Server System Service Guide

Remote Client System Requirements 

This section describes the minimum system requirements for a client computer that is 

accessing the Intel

® 

Modular Server Control user interface through a web browser. 

Table 6. Minimum System Requirements for Remote Web Console

Download Browser Plug-ins

Download the latest required Microsoft Internet Explorer* and Mozilla* Firefox

plug-ins at:

Adobe* Flash Player: 

http://www.adobe.com/products/flashplayer/

  

Java* SE Runtime Environment 6, Update 1: 

http://www.java.sun.com/javase/

downloads/index.jsp

 

Log in to the Intel

® 

Modular Server Control

To launch the Intel

® 

Modular Server Control, open a browser session on the remote

client system.

Enter the Intel

® 

Management Module default static IP address of 192.168.150.150 in the 

address bar of the web browser. The login screen (see 

Figure 49

) is displayed.

An administrator user account is enabled for the system. This default administrator 

account provides access to all available management configuration settings and actions.

User Account information:

— Username: admin
— Password: admin

Note:

Username and password are case sensitive.

Requirement

Remote Web Consoles/Clients

Operating System

Any operating system that supports either the 
Microsoft Internet Explorer* or Mozilla Firefox* web 
browser.

Web Browser

Microsoft Internet Explorer* 6 or 7

Mozilla Firefox* version 2.0 or later

NOTE:

For more information on web browser 
support and feature functionality, refer to 
the Release Notes.

Browser Plug-ins

Adobe* Flash Player Version 9 plug-in or later

Java* SE Runtime Environment 6 Update 1 or later

TCP/IP Network Stack

Yes

Summary of Contents for MFSYS25V2



































































































































































































































Reviews: