Intel NUC Kit NUC7i7BNH, NUC7i5BNH & NUC7i3BNH User Guide
4
2.
Remove the standoff from the 42mm position (B).
3.
Align the small notch at the bottom edge of the M.2 card with the key in the connector.
4.
Insert the bottom edge of the M.2 card into the connector (C).
5.
Secure the card to the standoff with the small silver screw (D).
If you are installing a 42mm M.2 SSD:
1.
Remove the small silver screw from the metal standoff on the motherboard (A).
2.
Align the small notch at the bottom edge of the M.2 card with the key in the connector.
3.
Insert the bottom edge of the M.2 card into the connector (B).
4.
Secure the card to the standoff with the small silver screw (C).
Installing and Removing Memory
Intel NUC Kits NUC7i3BNH and NUC7i5BNH have two DDR4 SO-DIMM sockets. Memory requirements:
•
1.2V memory
