background image

Cluster Configurator for Intel

®

 Omni-Path Fabric

The Cluster Configurator for Intel

®

 Omni-Path Fabric is available at: 

http://

www.intel.com/content/www/us/en/high-performance-computing-fabrics/omni-path-

configurator.html

.

This tool generates sample cluster configurations based on key cluster attributes,

including a side-by-side comparison of up to four cluster configurations. The tool also

generates parts lists and cluster diagrams.

Documentation Conventions

The following conventions are standard for Intel

®

 Omni-Path documentation:

Note: provides additional information.

Caution: indicates the presence of a hazard that has the potential of causing

damage to data or equipment.

Warning: indicates the presence of a hazard that has the potential of causing

personal injury.

Text in 

blue

 font indicates a hyperlink (jump) to a figure, table, or section in this

guide. Links to websites are also shown in blue. For example:
See 

License Agreements

 on page 12 for more information.

For more information, visit 

www.intel.com

.

Text in bold font indicates user interface elements such as menu items, buttons,

check boxes, key names, key strokes, or column headings. For example:
Click the Start button, point to Programs, point to Accessories, and then click

Command Prompt.
Press CTRL+P and then press the UP ARROW key.

Text in 

Courier

 font indicates a file name, directory path, or command line text.

For example:
Enter the following command: 

sh ./install.bin

Text in italics indicates terms, emphasis, variables, or document titles. For

example:
Refer to Intel

®

 Omni-Path Fabric Software Installation Guide for details.

In this document, the term chassis refers to a managed switch.

Procedures and information may be marked with one of the following qualifications:

(Linux) – Tasks are only applicable when Linux* is being used.

(Host) – Tasks are only applicable when Intel

®

 Omni-Path Fabric Host Software or

Intel

®

 Omni-Path Fabric Suite is being used on the hosts.

(Switch) – Tasks are applicable only when Intel

®

 Omni-Path Switches or Chassis

are being used.

Tasks that are generally applicable to all environments are not marked.

Intel

®

 Omni-Path Fabric—Preface

Intel

®

 Omni-Path Host Fabric Interface

Installation Guide

April 2020

10

Doc. No.: H76466, Rev.: 8.0

Summary of Contents for Omni-Path
























Reviews: