Intel
®
Server Chassis P4304XXMFEN2/P4304XXMUXX Product Family System Integration and Service Guide
59
3.
Option and Accessory Kit Integration and Service
Purpose
This chapter provides instructions for the integration of system components within a server chassis that
has the server board and other system components pre-installed. It includes installation instructions for
supported system options, and other available accessory option kits.
Before You Begin
Before working with your server product, observe the safety and ESD precautions found in the Warnings
section at the beginning of this manual.
Tools and Supplies Needed
•
Anti-static wrist strap and conductive foam pad (recommended)
•
Phillips* (cross head) screwdriver (#2 bit)
System Reference
All references to left, right, front, top, and bottom assume the reader is facing the front of the chassis.
Internal Cable Routing
See section 2.1 Internal Cable Routing.
Instruction Format
Each procedure described in this section will follow an illustration first format. This format will give the
reader the option to follow a quicker path to system integration by first seeing an illustration of the
intended procedure. If necessary, the reader can then follow the step-by-step instructions that will
accompany each procedure.
