Intel
®
Server Chassis P4304XXMFEN2/P4304XXMUXX Product Family System Integration and Service Guide
61
3.1.2
Optical Drive Removal
Note:
The optical drive is NOT hot-swappable. Before removing or replacing the drive, you must first
take the server out of service; turn off all peripheral devices connected to the system, turn off the system
by pressing the power button, and unplugging the power cord from the system or wall outlet.
To maintain proper system cooling, a filler panel must be installed if you do not install a device at this
location.
1.
Disconnect the power and data cables to the optical drive.
2.
Press on the slide release latches (see letter “A”) and pull the optical drive or slide assembly from
the chassis (see letter “B”). Remove the slides from the optical drive (see letter “C”).
Figure 34. Removing the Optical Drive
3.
If not replacing with another drive, reinsert an EMI shield into the chassis.
Figure 35. Re-inserting the Empty EMI Shield
