43
3-12 Power User Overclock Setting
Phoenix – AwardBIOS CMOS Setup Utility
Power User Overclock Settings
Item Help
Linear PCIEX Clock 100MHz
CPU Diff AMP Control 800MHZ
CPU Clock Ratio 10X
** Current DRAM CLOCK 800 MHz **
DRAM Clock at Next Boot Auto/800MHz
Host/PCI Clock at Next Boot 200/33MHZ
CPU Features Press Enter
CPU GTL Ref Select Default
NB GTL Ref Select Default
Memory VTT Ref Select Default
DRAM Timing Settings Press Enter
User OC Profile Press Enter
CPU Vcore 7-Shift Normal
CPU VDroop Setting Enabled
CPU PLL Select 1.500v(Default)
SB core Select 1.50v(Default)
CPU VTT Select Default
NB Core Select 1.125v(Default)
DRAM Voltage Select 1.850(Default)
Menu Level >
↑↓→←
Move Enter:Select Item +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Optimized Defaults F7:Standard Defaults
DRAM Clock at Next Boot
This item allows you to set DRAM clock .
CPU Vcore 7-Shift
This item allows you select the CPU Vcore Voltage xx% more than the standard value, by
this function for the precise over-clocking for extra demanding of performance.
NB Core Select
This item allows you to select value of Voltage for North Bridge Chipset.
SB Core Select
This item allows you to select value of Voltage for South Bridge Chipset.
DRAM Voltage Select
This item allows you to set the voltage of DRAM DIMM from a minimum of 1.73V to a
maximum of 2.74V by 16 stages.
Linear PCIE X Clock
The item allows you to set linear PCIEx clock from a minimum of 100MHz to a
maximum of 200MHz.
Host/PCI Clock at Next Boot
This item allows you to select the CPU/PCI Clock.
