17-23
OVERDRIVE® PROCESSOR SOCKET SPECIFICATION
17.6.3.2.
PENTIUM
®
PRO PROCESSOR COOLING REQUIREMENTS
(SYSTEMS TESTING ONLY)
The Pentium Pro processor case temperature must meet the specifications of the Pentium
Pro processor. Thermal testing should be performed under worst case thermal loading (Refer to
Section 17.6.3.1., “OverDrive® Processor Cooling Requirements (Systems Testing Only)”
for loading description), and with a cooling solution representative of the OEM’s cooling
solution. Refer to Table 11-5 for the Pentium Pro processor case temperature specification.
17.6.3.3.
VOLTAGE REGULATOR MODULES (SYSTEMS EMPLOYING A
HEADER 8 ONLY)
The case temperature of the voltage regulator on the OverDrive VRM must not exceed the spec-
ification of Table 17-7.
17.6.4.
Mechanical Criteria
17.6.4.1.
OVERDRIVE
®
PROCESSOR CLEARANCE AND AIRSPACE
REQUIREMENTS
Refer to Figure 17-4 for a drawing of the various clearance and airspace requirements.
Table 17-11. Thermal Test Criteria
Criteria
Refer To:
Comment
TPH
Section 17.5.1.
Air temperature entering the fan/heatsink of the
OverDrive
®
processor. Measured 0.3 inches (0.76
cm) above the center of the fan/heatsink.
Pentium
®
Pro processor Case
Temperature
Table 11-5
TC must meet the specifications of the Pentium Pro
Processor. Measured with a cooling solution
representative of the OEM’s.
Voltage Regulator Case
Temperature
Table 17-7
Table 17-12. Mechanical Test Criteria for the OverDrive
®
Processor
Criteria
Refer To:
Comment
Minimum airspace from top
surface of socket to any
object.
Figure 17-4
See “Total Clearance Above Socket” in Figure 17-4.
Minimum airspace around
all 4 sides of the OverDrive
®
processor fan/heatsink.
Figure 17-4
Required from the CPU package side to the top of the
vertical clearance area. See “A” in Figure 17-4.
Minimum airspace around
heatsink clip tabs.
Figure 17-4
Extend from the motherboard surface to the top of the
fan/heatsink. See “Keep Out Zones” in Figure 17-4.
Summary of Contents for Pentium Pro Family
