Intel® RAID Adapters RS3P4TF160F and RS3P4MF088F Hardware User Guide
43
8.5.1
How to use the Human Interface Infrastructure to Monitor the RMFBU
The HII can be used to configure disk arrays and logical drives. The HII is independent of the operating
system and can be accessed at server startup through the BIOS setup utility. The HII can only be accessed
when the system is configured for UEFI boot mode. The HII can also be used to monitor the MFBU.
Note:
Refer to the
Intel® RAID Software User Guide for full featured and entry-level RAID controllers
for more
information on the HII.
To view the RMFBU information, do the following:
1.
At boot, press the
<F2>
key when prompted and enter the
BIOS setup utility
.
2.
Navigate to
Main > Advanced > PCI Configuration
>
UEFI Option ROM Control.
3.
Look for the RAID card under the
Storage Controlle
r list.
4.
Press
<Enter>
to get into the
Main Menu
for the
HII Configuration Utility
.
Figure 22. HII Dashboard View Screen
