Intel® Server Board S1200SP Family Technical Product Specification
20
Figure 15. Intel
®
Server Board S1200SP DIMM Slot Layout
Table 5. Intel
®
Server Board S1200SP DIMM Maximum Configuration
Max Memory Possible
4Gb DRAM Technology
8Gb DRAM Technology
Single Rank UDIMM
16GB
(4 x 4GB DIMMs)
32GB
(4 x 8GB DIMMs)
Dual Rank UDIMMs
32GB
(4x 8GB DIMMs)
64GB
(4 x 16GB DIMMs)
3.3.1.2
Publishing System Memory
•
The BIOS displays the Total Memory of the system during POST if Display Logo is disabled in the BIOS
setup. This is the total size of memory discovered by the BIOS during POST, and is the sum of the individual
sizes of installed DDR4 DIMMs in the system.
•
The BIOS displays the Effective Memory of the system in the BIOS setup. The term Effective Memory
refers to the total size of all DDR4 DIMMs that are active (not disabled).
•
The BIOS provides the total memory of the system in the main page of the BIOS setup. This total is the
same as the amount described by the first bullet above.
•
If Display Logo is disabled, the BIOS displays the total system memory on the diagnostic screen at the end
of POST. This total is the same as the amount described by the first bullet above.
Note: Some server operating systems do not display the total physical memory installed. What is displayed is
the amount of physical memory minus the approximate memory space used by system BIOS components.
These BIOS components include, but are not limited to:
1.
ACPI (may vary depending on the number of PCI devices detected in the system)
2.
ACPI NVS table
Summary of Contents for S1200SPL
Page 3: ......
