Intel® Server Board S1200SP Family Technical Product Specification
65
Table 18. Additional Diagnostics on Error
Category
Data
System Data
First 256 bytes of PCI config data for each PCI device
PCI advanced error reporting registers
Processor Machine Check Architecure registers
iMC Machine Check Architecure registers
IIO Global error registers
6.11.16
Data Center Management Interface (DCMI)
The DCMI Specification is an emerging standard that is targeted to provide a simplified management interface
for Internet Portal Data Center (IPDC) customers. It is expected to become a requirement for server platforms
which are targeted for IPDCs. DCMI is an IPMI-based standard that builds upon a set of required IPMI standard
commands by adding a set of DCMI-specific IPMI OEM commands. Intel
®
S1200SP Server Platforms implement
the mandatory DCMI features in the BMC firmware (DCMI 1.5 compliance). Refer to DCMI 1.5 spec for details.
Only mandatory commands are supported. No support for optional DCMI commands. Optional power
management and SEL roll over feature is not supported. DCMI Asset tag is independent of baseboard FRU
asset Tag.
6.11.17
Lightweight Directory Access Protocol (LDAP)
The Lightweight Directory Access Protocol (LDAP) is an application protocol supported by the BMC for the
purpose of authentication and authorization. The BMC user connects with an LDAP server for login
authentication. This is only supported for non-IPMI logins including the embedded web UI and SM-CLP. IPMI
users/passwords and sessions are not supported over LDAP. LDAP can be configured (IP address of LDAP
server, port, and so on) using the BMC’s Embedded Web UI. LDAP authentication and authorization is
supported over the any NIC configured for system management. The BMC uses a standard Open LDAP
implementation for Linux*. Only open LDAP is supported by BMC. Microsoft Windows* and Novell* LDAP are
not supported.
Summary of Contents for S1200SPL
Page 3: ......