5. The production Intel
®
Server Chassis SC5299DP SKU includes:
•
Non-redundant 550-W PFC power supply
•
One non-redundant 120 mm cooling fan
•
Support for six, tool-free non-hot-swap hard drives. Upgradeable to hot-swap SAS/SATA 6-
drive bay.
•
Cables (one each):
Front Panel Cable (24-pin baseboard header to front panel)
USB Cable (USB header to chassis front panel)
•
Chassis intrusion switch assembly
•
Quick Start Guide
•
Note:
No AC power cords are included
The Intel
®
Entry Server Chassis SC5299DP is designed to work with boxed Intel
processors that include an active heat sink.
6. The production Intel
®
Server Chassis SC5299BRP SKU includes:
•
Redundant (1+0) 650-W PFC power supply with dual-line cord support (full redundancy
requires additional 650-W module which you must purchase separately)
•
One non-redundant 120 mm cooling fan
•
Support for six, tool-free non-hot-swap hard drives. Upgradeable to hot swap SAS/SATA 6-
drive bay.
•
Cables (one each):
Front Panel Cable (24-pin baseboard header to front panel)
USB Cable (USB header to chassis front panel)
•
Chassis intrusion switch assembly
•
Quick Start Guide
•
Note:
No AC power cords are included
The Intel
®
Entry Server Chassis SC5299BRP is designed to work with boxed Intel
processors that include an active heat sink.
7. Common accessories include:
•
Hot Swap Drive Bays (all the following drive bays require the APP3HSDBKIT bracket kit when
installing in an Intel
®
Server Board SC5299 chassis):
AXX6DRVGEXP: Expander-based 6-drive hot swap bay that supports
SAS/SATA drives. Requires two free SAS ports from the integrated SAS
controller, ROMB card, or SAS RAID card.
AXX6DRV3G: 6-drive hot-swap bay that supports SAS/SATA drives. Requires
six free SAS or SATA ports. SAS hard drive support requires SAS connectors
from a SAS-enabled board SKU, ROMB card, or SAS RAID card.
AXX6SCSIDB (for S5000VSA board only): 6-drive hot-swap bay that supports SCSI
drives. Requires six, free SCSI ports from add-on SCSI HBA or raid card.
