Server Utilities
4.
Reconnect the AC power, power up the system.
5.
Power down the system and disconnect the AC power.
6.
Return the Password Clear jumper to the Password Clear Protect position, covering pins
2 and 3.
7.
Close the server chassis.
8.
Reconnect the AC power and power up the server.
Clearing the CMOS
If you are not able to access the BIOS setup screens, the CMOS Clear jumper will need to be used
to reset the configuration RAM. The CMOS Clear jumper is located on jumper block J1H5.
1.
Power down the system and disconnect the AC power.
2.
Open the server.
3.
Move the jumper from the normal operation position, CMOS Clear by BMC, at pins 2 and 3 to
the CMOS Clear Force Erase position, covering pins 1 and 2 as indicated in the following
diagram.
Figure 15. CMOS Recovery Jumper
4.
Reconnect the AC power, power up the system.
5.
When the system begins beeping, power it down and disconnect the AC power.
6.
Return the CMOS Clear jumper to the CMOS Clear by BMC location, covering pins 2 and 3.
7.
Close the server chassis.
8.
Reconnect the AC power and power up the system.
38
Summary of Contents for SE7320VP2
Page 1: ...Intel Server Board SE7320VP2 User Guide Order Number C71354 002 ...
Page 10: ...Preface x ...
Page 14: ...Contents xiv ...
