SE7500CW2 Server Board Technical Product Specification
Appendix B: SE7500CW2Errata documentation
CXI
Revision 1.40
Appendix B: SE7500CW2Errata documentation
Table 70. Errata Summary
No.
Plans
Description of Errata
1.
Fixed
Intel® Xeon processors 2.6 GHz and 2.8 GHz C1 stepping not supported in BIOS
1.14.
2.
Fixed
LDCM 6.3 reported processor speeds change after a system reboot.
3.
Fixed
I can’t get my Adaptec 2100S RAID card to clear POST.
4.
Fixed
NetWare 6.0 Service Pack 2 won’t install with Hyper-threading enabled in
BIOS.
5.
NoFix
Disabling PXE support in BIOS doesn’t correctly disable Network boot support
with a PCI NIC add-in card.
6.
NoFix
BIOS is unable to select IDE CD-ROM or USB CDROM as a boot device.
7.
Investigating
LDCM 6.3 build 211 Wake on LAN does not reboot the server.
8.
Investigating
Windows 2000* won’t install on a Maxtor D540X-4G 137GIG ATA hard-drive.
9.
Investigating
Adaptec 2100S, 2110S, and 3410S, RAID cards cause LILO to hang with Red Hat
7.3.
10.
Investigating
LDCM 6.3 build 211 incorrectly lowers processor fan speed.
11.
Fixed
BIOS EBDA area disabled in BIOS 1.17.
12.
Investigating
Disable NIC in BIOS incorrectly disables incorrect NIC number.
13.
Investigating
UUID not programmed on all PBA #
A87967-506 and older
boards.
14.
Fixed
Logical processors not listed in BIOS POST if hyper-threading is enabled in F2
BIOS setup.