Intel
®
Server Board SE7500WV2 Training
Student Workbook
30
© 2003 Intel Corporation
Peripheral Components – Standard I/O
© 2003 Intel Corporation.
*Other names and brands may be claimed as the property of others.
Intel
®
Server Board SE7500WV2
Peripheral Components – Standard
I/O
•
PCI USB Controllers
–
Integrated into ICH3
–
Support for USB 1.1 specification
–
Two external USB ports
–
One on-board USB header
•
PCI IDE Controller
–
Integrated into ICH3
–
32-bit/33-MHz PCI bus master
–
Two channel ATA-100
–
Onboard 40-pin IDE connector
–
100-pin floppy/FP/IDE connector
–
Simultaneous use of both
connectors is supported
The ICH3 I/O controller hub includes three integrated PCI-based USB hubs, which in turn support two USB ports each.
The SE7500WV2 utilizes two of the integrated USB hubs to provide two external USB ports at the rear I/O panel and
one onboard USB header for routing an additional USB port to the front or back of the server chassis. The third USB hub
in the ICH3 is not used.
The ICH3 I/O controller hub also includes an integrated PCI-based Ultra DMA/100 IDE controller that supports
programmed I/O data transfers and bus master IDE data transfers, and provides two independent ATA-100 channels in a
single 32-bit, 33-MHz PCI bus master device. The SE7500WV2 provides a single IDE channel from this controller to
support add-in IDE devices such as a CD-ROM drive or DVD-ROM drive. The second IDE channel is not used.
Features of the ATA-100 IDE controller include:
•
Support for IDE drives and ATAPI devices using one of the following:
−
DMA Mode 0,1,2
−
Ultra DMA Mode 0,1,2,3,4,5
−
PIO Mode 0,1,2,3,4
•
IDE transfer rates up to 100 MB/s per channel
•
Buffering for PCI/IDE burst transfers
•
Master/slave IDE mode
•
32-bit, 33-MHz bus speed with a 100 MB/s burst transfer speed
•
Support for up to two devices
Two separate IDE connectors are available on the SE7500WV2 server board: a special high-density connector that
incorporates connection for the floppy, front panel and IDE devices (used for Intel® server chassis); and a server system
infrastructure (SSI)-compliant 40-pin connector (used for third-party reference chassis).
Note:
These connectors can be used simultaneously.
Summary of Contents for SE7500WV2 - Server Chassis - SR2300
