System BIOS
Intel® Server Board SE7520AF2 TPS
124
Revision
1.2
Intel order number C77866-003
Feature
Options
Help Text
Description
Processor Retest
Enabled
Disabled
If enabled, all processors will
be activated and retested on
the next boot. This option will
be automatically reset to
disabled on the next boot.
Rearms the processor sensors.
Only displayed if the Intel
Management Module is
present.
5.11.5.1.3
IDE Configuration Sub-Menu
Table 43. BIOS Setup IDE Configuration Menu Options
Feature
Options
Help Text
Description
Onboard P-ATA
Channels
Disabled
Primary
Disabled: disables the
integrated P-ATA controller.
Primary: enables only the
primary P-ATA controller.
Controls state of integrated P-
ATA controller.
Onboard S-ATA
Channels
Disabled
Enabled
Disabled: disables the
integrated SATA controller.
Enabled: enables the integrated
SATA controller.
Controls state of integrated SATA
controller.
Configure S-ATA as
RAID
Disabled
Enabled
When enabled the SATA
channels are reserved to be
used as RAID.
When Enabled, S-ATA Mode is
grayed out since the system is in
Enhanced mode.
S-ATA Mode
Enhanced
Legacy
Legacy mode allows installation
of legacy operating systems
that do not support Enhanced
Mode by allowing the user to
emulate the ICH5-R S-ATA
ports (S-ATA A1/A2) as P-ATA
devices.
When in Legacy Mode and P-
ATA Channels is set to Primary,
the S-ATA A1 emulates
Secondary Master, and S-ATA A2
emulates Secondary Slave (A1-
Sec M/A2-Sec S)
When in Legacy Mode and P-
ATA Channels is set to Disabled,
the S-ATA A1 emulates Primary
Master, and S-ATA A2 emulates
Secondary Master (A1-Pri M/A2-
Sec M)
Primary IDE Master
[Device Details]
While entering setup, BIOS auto
detects the presence of IDE
devices. This displays the
status of auto detection of IDE
devices.
Selects submenu with additional
device details.
Primary IDE Slave
[Device Details]
While entering setup, BIOS auto
detects the presence of IDE
devices. This displays the
status of auto detection of IDE
devices.
Selects submenu with additional
device details.
Secondary IDE
Master
[Device Details]
While entering setup, BIOS auto
detects the presence of IDE
devices. This displays the
status of auto detection of IDE
devices.
Selects submenu with additional
device details. Option displayed
grayed out and listing 'Not
Detected' when in Enhanced
Mode. In Legacy Mode the S-
ATA devices will be displayed
here.