System BIOS
Intel® Server Board SE7520AF2 TPS
128
Revision
1.2
Intel order number C77866-003
5.11.5.1.7
USB Mass-Storage Configuration Sub-Menu
Table 48. BIOS Setup, USB Mass Storage Device Configuration Sub-menu Selections
Feature
Options
Help Text
Description
USB Mass Storage
Reset Delay
10 Sec
20 Sec
30 Sec
40 Sec
Number of seconds POST waits for the USB
mass storage device after start unit command.
Device #1
N/A
N/A
Only displayed if a device
is detected, includes a
DeviceID string returned
by the USB device.
Emulation Type
Auto
Floppy
Forced FDD
Hard Disk
CDROM
If Auto, USB devices less than 530MB will be
emulated as Floppy and remaining as hard drive.
Forced FDD option can be used to force a HDD
formatted drive to boot as FDD (Ex. ZIP* drive).
Device #n
N/A
N/A
Only displayed if a device
is detected, includes a
DeviceID string returned
by the USB device.
Emulation Type
Auto
Floppy
Forced FDD
Hard Disk
CDROM
If Auto, USB devices less than 530MB will be
emulated as Floppy and remaining as hard drive.
Forced FDD option can be used to force a HDD
formatted drive to boot as FDD (Ex. ZIP drive).
5.11.5.1.8
PCI Configuration Sub-Menu
Table 49. BIOS Setup PCI Configuration Sub-menu Selections
Feature
Options
Help Text
Description
Onboard SCSI
Disabled
Enabled
Onboard SCSI ROM Mode IS (RAID 0)
IM/IME (RAID 1/1e)
IM/IME = Integrated
Mirroring/Integrated Mirroring
Enhanced
IS = Integrated Striping
Before changing modes, back up
array data and delete existing
arrays, if any. Otherwise, loss of
all data may occur.
After operating system
installation with a selected
SCSI RAID mode, only
change this mode selection if
prepared to rebuild RAID
array. Changing the mode
could damage current
operating system installation
on RAID volume.
Grayed out if device is
disabled.