10BEnvironmental and Regulatory Specifications
Intel® Server System SR2500AL
Revision – 1.6
Intel order number D31980-009
82
11.4 Product Regulatory Compliance
The server chassis product, when correctly integrated per this guide, complies with the following
safety and electromagnetic compatibility (EMC) regulations.
Intended Application
– This product was evaluated as Information Technology Equipment
(ITE), which may be installed in offices, schools, computer rooms, and similar commercial type
locations. The suitability of this product for other product categories and environments (such as:
medical, industrial, telecommunications, NEBS, residential, alarm systems, test equipment,
etc.), other than an ITE application, may require further evaluation.
Notifications to Users on Product Regulatory Compliance and Maintaining
Compliance
To ensure regulatory compliance, you must adhere to the assembly instructions in this guide to
ensure and maintain compliance with existing product certifications and approvals. Use only
the described, regulated components specified in this guide. Use of other products /
components will void the UL listing and other regulatory approvals of the product and will most
likely result in noncompliance with product regulations in the region(s) in which the product is
sold.
To help ensure EMC compliance with your local regional rules and regulations, before computer
integration, make sure that the chassis, power supply, and other modules have passed EMC
testing using a server board with a microprocessor from the same family (or higher) and
operating at the same (or higher) speed as the microprocessor used on this server board. The
final configuration of your end system product may require additional EMC compliance testing.
For more information please contact your local Intel Representative. This is an FCC Class A
device and its use is intended for a commercial type market place.
11.5 Use of Specified Regulated Components
To maintain the UL listing and compliance to other regulatory certifications and/or declarations,
the following regulated components must be used and conditions adhered to. Interchanging or
use of other component will void the UL listing and other product certifications and approvals.
Updated product information for configurations can be found on the Intel Server Builder Web
site at the following URL:
http://channel.intel.com/go/serverbuilder
If you do not have access to Intel’s Web address, please contact your local Intel representative.
Server chassis
(base chassis is provided with power supply and fans)
⎯
UL listed.
Server board
⎯
you must use an Intel server board—UL recognized.
Add-in boards
⎯
must have a printed wiring board flammability rating of minimum UL94V-
1. Add-in boards containing external power connectors and/or lithium batteries must be
UL recognized or UL listed. Any add-in board containing modem telecommunication
circuitry must be UL listed. In addition, the modem must have the appropriate
telecommunications, safety, and EMC approvals for the region in which it is sold.
Peripheral Storage Devices
- must be UL recognized or UL listed accessory and TUV or
VDE licensed. Maximum power rating of any one device or combination of devices can
not exceed manufacturers specifications. Total server configuration is not to exceed the
maximum loading conditions of the power supply.
The following table references Server Chassis Compliance and markings that may appear on
the product. Markings below are typical markings however, may vary or be different based on
how certification is obtained.
Note: Certifications Emissions requirements are to Class A
Summary of Contents for SR1500 - AXXMINIDIMM DDR-2 RAID Controller Cache Memory
Page 12: ......
