SR2300 2U Server Chassis Technical Product Specification
Revision 1.2
Intel Order Number A94546-004
25
4.1 Flex
Bay
For those configurations that require a floppy drive and CD-ROM or DVD drive, the seventh
drive bay or “Flex Bay” can be configured as a peripheral bay by inserting an optional
Floppy/CDROM or Floppy/DVD Module. . The Floppy/CDROM or Floppy/DVD Module is a 3.5”
floppy drive and a 0.5” (12.7mm) slim-line CD-ROM or DVD drive mounted as a single unit in
the peripheral bay. A release latch allows for tool-less removal from the front of the server,
however, these modules are not hot swappable. The system must be powered down before the
module is inserted or removed from the flex bay.
A
OM12420
B
B
Figure 17. Floppy/CDROM or Floppy/DVD Module
4.2 Hard Disk Drive Bays
The SR2300 server chassis can support up to seven tray-mounted SCA2, 3.5” x 1”,
Ultra2/Ultra160/U320 hard disk drives. For RAID configurations, the SCSI drives may be hot-
swapped while the system is running.
4.2.1
Hard Disk Drive Trays
Each hard drive used in the system must be mounted to a drive tray, making insertion and
extraction of the drive from the chassis very simple. Each drive tray has its own dual purpose
latching mechanism which is used to both insert/extract drives from the chassis and lock the
tray in place. Each drive tray supports a light pipe providing a drive status indicator, located on
the backplane, to be viewable from the front of the chassis.
Summary of Contents for SR2300 - FRONT BEZEL BLK
Page 10: ......
