90
Intel
®
Server System SR2600UR/SR2625UR Service Guide
d. Continue with step 5.
Figure 80. Installing Power and SATA Cables (Passive Midplane Installed)
Note:
You will not use the short SATA cable from the 6th HDD kit in a system with a passive
midplane.
5. Install the hard drive into the sixth hard drive bay. For instructions, see
“Installing a
SAS or SATA Hot-swap Hard Disk Drive” on page 71
.
Installing the 2.5-Inch Fixed Hard Disk Drives
To install up to two fixed 2.5-inch solid state hard disk drives into Intel
®
Server System
SR2600UR/SR2625UR, your system must meet the following requirements:
•
You must purchase the 2.5-inch fixed hard disk drive kit, order number
ASR2600FXDRV.
•
You must purchase one or two 2.5-inch solid state hard disk drives.
•
Your server system must have one or two free SATA ports on the server board or you
must have an add-in card that supports the 2.5-inch solid state hard disk drives.
Note:
The 2.5-inch fixed hard disk drivers (ASR26XXFXDRV) configured with Intel
®
Embedded
Server RAID Technology II is not compatible with hardware RAID mode by using an
AF002122
A
B
D
C
Summary of Contents for SR2600URLX
