102
Intel
®
Server System SR2600UR/SR2625UR Service Guide
5. Install the Intel
®
RMM3 filler panel into the system back panel (see
Figure 95
).
Figure 95. Installing the Intel
®
RMM3 filler panel
6. Install the processor air duct. For instructions, see
“Installing the Processor Air
Duct” on page 57
.
7. Install the PCI riser assembly into the server system. For instructions, see
“Installing the PCI Riser Assembly” on page 51
.
Replacing the Midplane Board
The following sections describe how to replace the midplane board.
Removing the Midplane Board
To remove the midplane board, follow these steps:
1. Remove the PCI riser assembly. For instructions, see
“Removing the PCI Riser
Assembly” on page 50
.
2. Remove the processor air duct. For instructions, see
“Removing the Processor Air
Duct” on page 56
.
3. Disconnect all cables from the midplane board.
4. Remove the fan baffle. For instructions, see
“Removing the Fan Baffle” on page 67
.
5. Remove the bridge board as follows:
AF00
3
011
Summary of Contents for SR2600URLX
