» The sensor must be installed where a possible intruder is easily detected, that is, where there is movement across the
sensor’s detection beams.
» We recommend that the sensor configuration is done according to item
5. Configuring the sensor IVP 4101 PET smart
(for cards in version 4410350/5 and firmware 3.0.0) and item 8. Configuring the sensor IVP 4101 PET smart (for cards
version 4410350/4 and firmware 2.2.1 o earlier).
» LGPD – General Personal Data Protection Law: Intelbras does not access, transfer, capture or perform any other type of
processing of personal data from this product.
