30
Deleting the stored numbers
Lift handset, press
+
DIRECTORY POSITION N
O
(10 to 19), wait for
confirmation tone.
Example: You want to store 0 XX 48 2819500 in the first position of your phone
directory, considering that the call is established through route 2: Press 17 + 10 + 2
+ 0 XX 482819500. When you call the number, press 71 + POSITION IN THE
DIRECTORY.
5.2 Using the individual phone directory
Press
+
POSITION IN THE DIRECTORY (10 to 19), after receiving the dial
tone press FLASH. If your phone uses decadic signal, press
instead of
FLASH.
6. TOLL RESTRICTION
There are two types of call barring; one set by the proper extension and another
one set by the PABX .
Importante
- The extension set with call barring receives internal dial tone with signal.
(continuous tone followed by beeps at each second);
- If the extension was set with a barring category, it will not accept another
program setting until the previous is cancelled;
- Even if call barring was set, external line access can occur through private code
or using the extension password (
see items 19.3 and 19.6).
6.1 Set TOLL RESTRICTION from extension
This is possible only if the extension has a password as it is also required to cancel
this feature.
From your extension, lift handset, press
+
CATEGORY, wait for
confirmation tone.
CATEGORY
1 block only (IDD), releasing (DDD), regional and local access;
2 block only (DDD) and (IDD), releasing local e regional access;
3 block regional, (DDD) and (IDD), releasing only local access;
4block total.
Cancel call barring
From your extension, lift handset, press
+
EXTENSION PASSWORD,
