16
11. 15-key programmable module (MOD 115).
Note
: sold separately.
12. Handset holder in wall position.
1.2. Wall Position
When using the terminal in the wall position, the handset holder’s position must also be changed.
Remove the handset from the holder, and put it back in place, leaving the support for the handset as highlighted in the
illustration..
1.3. Rear view
5
3
1
2
4
1. Connection for extension.
2. Connection for handset.
3. Headset connection
4. Connection for key module.
5. Presence Sensor: enables environment monitoring through an infrared presence sensor installed in the foot of the termi-
nal. Upon detecting movement in the environment, the terminal may emit a sound warning, make a call to a predetermi-
ned number (internal or external¹), send an SMS¹, or trigger an external action.¹.
¹ To use these services, you must check availability at the PABX.
1.4. Assembling the base
Dear customer, the correct way to assemble and disassemble the foot on the base of the TI 5000 terminal is described below.
2
1 5
3
4
5
5
6
6
1. Connection cable between the TI 5000 board and the motion sensor1.
2. Foot of the terminal.
3. Motion sensor board1.
4. Base hooking.
