FLX-88 Installation Guide
RS232 and TCP/IP Commands
RS232 Settings: 9600 baud, 8 Data bits, 1 Stop bit, Parity = None
TCP/IP Settings: User defined IP address, port 4001
There is either a period (.) or a semicolon (;) at the end of each command. These characters must be
present for the command to process correctly.
There are no spaces between any of the characters in the command string.
xx
=
Input Number (input 2 would be
02
)
yy
=
Output Number (output 3 would be
03
)
<CR> =
Carriage return (Hex
0D
)
<LF> =
Line Feed (Hex
0A
)
Routing Commands
Description
Command
Response
Route input
xx
to output
yy
xx
B
yy.
AV:
xx
->0
yy
<CR><LF>
Route input
xx
to all outputs
xx
All.
xx
To All<CR><LF>
Route inputs to corresponding outputs
All#.
All Through.<CR><LF>
Route input xx to multiple outputs yy Number
of outputs is unlimited; each output must be
separated by a comma (,)
xxByy,yy.
xxVyy,yy<CR><LF>
Turn off all outputs
All$.
All Closed.<CR><LF>
Turn off specific output
yy
yy
$.
AV:
yy
Closed.
<CR><LF>
Output
yy
routing status
Status
yy
.
V: xx->0yy<CR><LF>
Routing status of all inputs.
Status.
V: xx->0yy<CR><LF>
(Repeating sequence
starting with output
1, output 2, etc.)
Examples:
02All.
Route Video and Audio from input 2 to all outputs
04$.
Turn off Video and Audio for output 4
06B03.
Route Video and Audio from input 6 to output 3
03B02,08.
Route Video and Audio from input 3 to outputs 2 and 8
25