INTELLI HEAT CALI Avanti, Installation And Instruction Manual

9

6.3. 

Programming Comfort temperature and Set back temperature

It is possible to programme two separate temperature levels: Comfort temperature is the desired ambient temperature during operation in 
Comfort and Pilot Wire mode or when programming; Set back temperature is the ambient temperature in Night-time Reduction mode.
These two temperature levels can be programmed using the plus and minus keys. A blinking temperature icon on the screen indicates that the 
temperature is being programmed. 
Comfort temperature can be programmed in Comfort mode, Set back temperature can be programmed in Night-time Reduction mode. 

The two temperature levels are also used when programming: 

0

2

4

6

8 10 12 14 16 18 20

Setback

Comfort

THERMOMETER

TEMPER

ATURE

TIME 

6.4. 

Setting times and weekly programming

Press the ‘stand-by’ and ‘mode’ keys at the same time and hold for three seconds. 

A dot will blink on the screen next to the days of the week (1-7). The current day can be selected using the plus or minus key. Use the ‘mode’ key to 
confirm the selection.
The number corresponding to the hour will blink. Programme the correct time using the plus and minus keys. Confirm the selection with the ‘mode’ 
key. 
The number corresponding to the minutes will blink. Programme the correct minutes using the plus and minus keys. Confirm the selection with the 
‘mode’ key. 

Comfort temperature is the desired ambient temperature during the time periods selected; Set back temperature is the (reduced) desired 
temperature outside the selected time periods.