133
Aptus WEB
4
Wi-Fi Access
Point
Configuration
- SSID : The SSID is the network name shared among all devices in
a wireless network. The SSID must be identical for all devices in the
wireless network. It is case-sensitive and must not exceed 32 alpha-
numeric characters, which may be any keyboard character. Make
sure this setting is the same for all devices in your wireless network.
- Channel : Select an appropriate channel from the list provided to
correspond with your network settings. All devices in your wireless
network must use the same channel in order to function correctly.
Try to avoid conflicts with other wireless networks by choosing a
channel where the upper and lower three channels are not in use.
- Authentication Type : Module supports an authentication mode
that the 802.11 device uses when it authenticates and associates
with an access point or IBSS cell.
- Password : WiFi access password.
- Max Stations : Setting max stations.
- Disable SSID Broadcast : Select whether or not to broadcast
the SSID in a wireless network. Select Disable to display the
network name continuously or select Enable to hide it from the
list.
5
Network Service
Configuration
- Telnet Service : Enable or disable telnet login support.
- HTTPS Port : HTTPS port number.
6
GX Local For-
ward to PC Port
To remotely access GX ACU from Intellian's Aptus PC Software,
either HTTPS or SSH connection needs to be forwarded. It is
recommended to forward less preferred protocol. If "HTTPS" is
often used and Aptus PC software is also required, select "SSH
to PC". If "SSH" is often used, select "Web to PC".
7
Sys Log
Configuration
Set the system log configuration.
Antenna sends log messages according to emergency level.
Enabling this function sends the message to your management
server.
- Management Server : Sys log function enable/disable
- Server IP : Management server IP address
- UDP Port : Management port
- Message Type : Select message type (Intellian message level)
to send to management server (Lower number indicates higher
emergency).
- Sys log Target Level : If you select this target level, the management
server receives log message equal to or less than this level.
Summary of Contents for GX60
