1Touch
®
evo3 Series Fingerprint Lock
http://www.1touchlock.com | Intelligent Biometric Controls, Inc. | v1.1
Choose whether your lock should be
set to a Left ‘L’ or Right ‘R’ handed
position:
m
When looking into the room being
secured: If the door hinges are on the
right side of the door, then your lock
needs to be set to the Right ‘R’
Position. If the door hinges are on the
left side of the door, then your lock
needs to be set to the Left ‘L’ Position
Setting the back lock handle position:
m
Take the back body cover off the lock
as seen on page 12. Once the back
body cover is removed the handle
orientation switch will be displayed, as
seen in figure 1.
m
With a fingertip pull down on the
switch. A click and release of the
handle will occur. The handle will
swing up to the vertical position (figure
2).
m
Now pull the handle down to the
desired orientation. A click will place
the handle into position (figure 3).
Setting the front lock handle position:
m
Turn the front lock body in order to see
the back side with the axel; which has
the handle orientation switch (figure 4).
m
Using a fingerprint pull the switch up
to release the handle, then turn the
handle to the desired orientation.
m
The handle will click into place and
you are ready to install your lock.
9.0 Setting the Direction of the Handle
11
1Touch
®
evo3 Series Fingerprint Lock
Figure 2
Figure 3
Figure 4
Figure 1
L
R
L
R
L
R