Intelligent Biometric Controls 1Touch evo3 Series Manual Download

Page: 13 / 14

Figure 6

Disassembly:

Using the tool represented in figure 5,

remove the nut highlighted in figure 6.

Slide the Back Body Cover,

highlighted in figure 7, off of the Back
Body of the 1Touch lock.

Remove the 2 screws, highlighted in

figure 8, to separate the Front and
Back Lock Bodies.

Assembly:

Replace existing latch with the latch

provided with the 1Touch

Using the

necessary

supplied

rubber

gaskets

, align the lock Front and Back

Bodies into position. Be sure to pass
the power cable through the door hole
and also through the hole in the Back
Body (above and right of the top screw
in figure 4).

Power pack runs on 4

AA batteries

a 9V battery!! The

NOT

Power cable/adapter connects to
the Black Battery pack on the back
lock body!

With the Front and Back Bodies in

position, replace the 2 screws
highlighted in figure 8.

Replace the Back Body Cover

highlighted in figure 7

Replace the nut highlighted in figure 6

For more installation information visit:

http://www.fingerprintdoorlocks.com/help/

Figure 7

Figure 8

Figure 5

10.0 Disassembly and Assembly

1Touch

evo3 Series Fingerprint Lock

http://www.1touchlock.com | Intelligent Biometric Controls, Inc. | v1.1

Summary of Contents for 1Touch evo3 Series















Search results

Summary of Contents for 1Touch evo3 Series

Reviews:

Related manuals for 1Touch evo3 Series

Brands by name

Popular brands

Intelligent Biometric Controls 1Touch evo3 Series, Manual

Search results

Summary of Contents for 1Touch evo3 Series

Reviews:

Related manuals for 1Touch evo3 Series

Brands by name

Popular brands