Intelligent Biometric Controls 1Touch evo3 Series Manual Download

Page: 7 / 14

Lock Operation

4.0 Unlocking Door with Fingerprint

To open with an enrolled fingerprint simply slide the cover up & place the
finger gently on the scanner.

NOTE: You will hear a beep & a click sound. Your door is now open.

NOTE: If the cover is already up: simply hit the # button to activate the
scanner.

PRESS:

8 Digit Pass Code

NOTE: Do not enter the 3 digit user ID.

NOTE: You will hear a beep & a click sound. Your door is now open.

To open the lock from inside your home or business simply turn the
handle.

NOTE: The 1Touch evo3 always provides “free egress”. It is

impossible to prevent someone from exiting the building.

After you exit through the door or the door shuts behind you the 1Touch

evo3 automatically locks the latch.

When enabled, Passage Mode allows the 1Touch evo3 to be unlocked

simply by lifting the slide cover or pressing the ‘#’ button. This feature is
useful when user authentication is not required.

PRESS:

* + * + Master Code + #

NOTE: Entering the code above will toggle Passage Mode between

enabled status and disabled status.

NOTE: Unlock by sliding the cover up or hitting the # button.

4.1 Unlocking Door with a Pass Code

4.2 Unlocking Door from the Inside

4.3 Locking the Door

4.4 Enabling/Disabling Passage Mode

1Touch

evo3 Series Fingerprint Lock

http://www.1touchlock.com | Intelligent Biometric Controls, Inc. | v1.1

Summary of Contents for 1Touch evo3 Series















Search results

Summary of Contents for 1Touch evo3 Series

Reviews:

Related manuals for 1Touch evo3 Series

Brands by name

Popular brands

Intelligent Biometric Controls 1Touch evo3 Series, Manual

Search results

Summary of Contents for 1Touch evo3 Series

Reviews:

Related manuals for 1Touch evo3 Series

Brands by name

Popular brands