Intelligent Biometric Controls 1Touch evo3 Series Manual Download

Page: 8 / 14

Deleting Users

5.0 Deleting a Fingerprint User with a User ID

PRESS:

2 + # + Master Code + Users 3 Digit ID + Users
3 Digit ID Again + #

NOTE: When successful the lock will make a solid single beep. If
unsuccessful it makes 3 quick beeps.

HINT:

This procedure will delete all fingerprint users with user ID’s and

those without user ID’s!

PRESS:

3 + # + Master Code + #

NOTE: When successful the lock will make a solid single beep. If
unsuccessful it makes 3 quick beeps.

PRESS:

2 + * + Master Code + Users 3 Digit ID + Users
3 Digit ID Again + #

NOTE: When successful the lock will make a solid single beep. If
unsuccessful it makes 3 quick beeps.

PRESS:

3 + * + Master Code + #

NOTE: When successful the lock will make a solid single beep. If
unsuccessful it makes 3 quick beeps.

5.1 Deleting ALL Fingerprint Users

5.2 Deleting Pass Code Users with User ID’s

5.3 Delete ALL Pass Code Users

1Touch

evo3 Series Fingerprint Lock

http://www.1touchlock.com | Intelligent Biometric Controls, Inc. | v1.1

Summary of Contents for 1Touch evo3 Series















Search results

Summary of Contents for 1Touch evo3 Series

Reviews:

Related manuals for 1Touch evo3 Series

Brands by name

Popular brands

Intelligent Biometric Controls 1Touch evo3 Series, Manual

Search results

Summary of Contents for 1Touch evo3 Series

Reviews:

Related manuals for 1Touch evo3 Series

Brands by name

Popular brands