Network Connection
Connect the SD-400 to your Local Area Network using the LAN connector on the back of the
device if you intend to manage and review the calls from a remote PC.
SD-400 Setup
The default settings for the SD-400 enable four analog lines to record and store on the local 8
GB SD memory card. The device is also enabled in default settings to allow LAN access. The only
configuration changes required are to set the date and time. No other changes are required in
the setup of the SD-400 unless changes are required from the default settings of the SD-400.
Setting The Date/Time on the SD-400
Double-Click on the Setup Icon to access system options.
Select Option 3 – Date/Time
Option 1 – Set the Date (Select the Return icon after setting date to return to main screen)
Option 2 – Time Setting (Select the Return icon after setting date to return to main screen)
Option 3 – No Changes Required
Option 4 – No Changes Required
Option 5 – Set your time zone +/- in reference to GMT
