9
2. Display high & low limit values operation
Press MODE key for about 3s and the screen will show "COU", Press
MODE key twice and the screen will show "PST". And press PRINT key
and the screen will show "----Hi----", and than the screen display high limit
values. Press MODE key and the screen will show "----Lo----", and
then the screen display low linit values. press PRINT key to exit.
3. LCD indications and buzzer
10d low limit value
high limit value
If set-up menu select PASS-0, when the object is higher the low limit
value and the object is lower the high limit value, the buzzer will sound.
If set-up menu select PASS-1, when the object is lower the low limit
value or the object is higher the high limit value, the buzzer will sound.
4. Clear the check weighing settings
Press MODE key for about 3s and the screen will show
"COU", Press MODE key three time and the screen will show
"PST CE". And press PRINT key to clear the high & low limit
values.
vii. weigh hold on stable
Press PRINT key until the screen display
, the balance
into weigh hold on stable mode. when balance stable, weight
is held in display until weight is removed, and scales return to
zero.in weigh hold on stable mode, press PRINT key until
disappear, balance into normal weighing mode.
