background image

spEciFications

Standards 

•  IEEE 802.3 (10Base-T Ethernet)

 

•  IEEE 802.3u (100Base-TX Fast Ethernet)

 

•  IEEE 802.3x (Flow Control and Backpressure)

General

 

•  Media support: 10Base-T Cat3, 4, 5 UTP/STP RJ45; 100Base-TX Cat5

 

  UTP/STP RJ45

 

• Ports: 48 10/100Base-TX RJ45 ports

 

•  Packet filter/forwarding rate: 148,800 pps (100 Mbps); 14,880 pps (10

 

  Mbps) 

•  Backplane speed: 9.6 Gbps

 

•  MAC address table: 8192 entries

 

•  Buffer size: 512 kBytes

 

•  Switch architecture: store and forward switch technology

 

•  FCC Class B, CE, RoHS

LEDs

 

•  Power, Link/activity

Power

 

•  Internal power supply: 100 – 240 V AC, 50/60 Hz

 

•  35 W power consumption

 

•  UL safety approved

Environmental

 

•  Metal housing, 19” rackmount, 1 U

 

•  Dimensions: 440 (W) x 295 (L) x 44 (H) mm (17.25 x 11.61 x 1.75 in.)

 

•  Weight: 3.0 kg (6.6 lbs.)

 

•  Operating temperature: 0 – 40°C (32 – 104°F)

 

•  Operating humidity: 10 – 90% RH, non-condensing

 

•  Storage temperature: -40 – 70°C (-40 – 158°F)

Package Contents

 

• Fast Ethernet Rackmount Switch

 

• Rackmount kit for rack installation

 

•  Power cord

 

•  User manual

 

6

Summary of Contents for 522618









Reviews: