Click the 'Apply' button to prepare to restart the router, and you'll see this
message:
Wait for about 30 seconds, then click 'OK!'.
You'll be forwarded to the router management Web interface. The router
is now running with the new settings.
If all information entered is correct, you can access the Internet now.
Attention DSL Users:
While PPPoE is the most common way to connect to DSL Internet Service,
it still may be necessary to enable "Cable Modem" in the Broadband
settings.
Below are a few examples for using "Cable Modem" instead of "xDSL
PPPoE", even if your Internet Service is a DSL service.
•
Your ISP has provided you with a so-called 'Modem-Router' instead
of a simple "Modem"
•
You ISP has not given you a username and password for PPPoE
login (implying that it is not required)
•
When your computer is connected directly to the modem, the
Computer obtains an IP address which is in the private IP network
range (192.168.xxx.yyy, 10.xxx.yyy, 172.16.xxx.yyy)
•
You can connect to the Internet with your computer connected
directly to the modem without using a dialer program asking for a
username and password
•
If your attempts to utilize xDSL/PPPoE fail repeatedly you should
activate "Cable Modem" as a troubleshooting step.
