Default Tx Key (4):
Encryption Key
1 to 4 (5-8):
Enable 802.1x
Authentication (9):
RADIUS Server
IP address (11):
RADIUS Server
Port
(12):
RADIUS Server
Password (13):
You can set up to four sets of WEP keys, and you
can decide which key is being used by default here.
If you don't know which one you should use, select
'Key 1'.
Input WEP key characters here. The number of
characters must be the same as the number
displayed n the 'Key Format' field. You can use any
alphanumerical characters (0-9, a-z, and A-Z) if
you select 'ASCII' key format. If you select 'Hex' as
key the format, you can use characters 0-9, a-f, and
A-F. You must enter at least one encryption key here,
and if you entered multiple WEP keys, they should
not be same.
IEEE 802.1x is an authentication protocol. Every
user must use a valid account to login to this
wireless router before accessing the wireless LAN.
The authentication is processed by a RADIUS server.
This mode authenticates the user by IEEE 802.1x,
but it does not encrypt the data during
communication. If there is a RADIUS server in your
environment, enable this function. Check this box
and another sub-menu will appear:
11
12
13
Enter the IP address of the radius
server here.
Enter the port number of the radius
server
here.
Enter the port number of the radius
password here.
