2
ENGLISH
2 4 6 8 10 12 14 16
CONNECTIONS & INDICATORS
LEDs
The LED indicators make it
easier to monitor the switch
and its connections.
Ports
All ports on the switch support
Auto-MDI/MDI-X functionality,
so crossover cables and uplink
ports are not needed for
connections to PCs, routers,
other switches, etc. Cat5/5e/6
UTP/STP cables provide
optimal performance; if a status
LED doesn’t indicate a link,
check the corresponding
device for proper setup and
operation.
Power
Use the included power cord to connect the device to an AC outlet. Confirm that the
power LED on the front panel is lit.
PLACEMENT
Prior to use, it is recommended that the switch be placed/positioned:
• on a level surface that can support the weight of the switch
• with a minimum of 25 mm (approx. 1”) of clearance on the top and sides for adequate
ventilation
• away from sources of electrical noise: radios, transmitters, broadband amplifiers, etc.
• where it cannot be affected by excessive moisture
Rackmount
The switch includes brackets and screws for optional rack mounting.
1. Disconnect any cables from the switch.
2. Position a bracket over the mounting holes on one side of the switch and secure it in place
with screws.
3 Repeat Step 2 on the other side of the switch.
4. Position the switch in the rack and screw the brackets to the rack.
5. Reconnect any cables.
LED Status Operation
Power
On
Power on
Off
Check the AC connection; turn the power on
PoE
On
Port is linked to a PSE/PoE device
Off
No PSE/PoE device is linked
LNK
On
Valid port connection
Blinking
Valid port connection; data transmitted/received
Off
No link established
MAX 1 (1-4) On
Power output (4 ports) > 55 W: Additional
connections may not receive power
Blinking
Power output (4 ports) > 70 W (maximum)
Off
Power output (4 ports) < 55 W or no link
established
MAX 2 (5-8) On
Power output (4 ports) > 55 W: Additional
connections may not receive power
Blinking
Power output (4 ports) > 70 W (maximum)
Off
Power output (4 ports) < 55 W or no link
established
560641_04_man_ML1.indd 2
1/23/15 2:13 PM
