Network Video Recorder
User Manual
Quick Navigation
92
Issue V4.6 (2021-05-12)
Parameter
Description
Setting
Emission Rate
The emission rate is the
capability of an object to emit
or absorb energy.
The emission rate should be set
only when the target is special
material.
[Setting method]
Enter a value manually.
[Default value]
0.95
Distance(M)
The distance between camera
and target.
[Setting method]
Enter a value manually.
[Default value]
15
Enter actual distance when
the distance between
camera and target is less
than 15 m. Enter 15 when
the distance between
camera and target is
great than or equal to 15
m.
Alarm
Open or close the alarm output
and linkage of area.
[Setting method]
Tick the alarm areas
Step 3
Set temperature area.
1.
Tick an area ID.
2.
Select type from drop-list.
3.
Press and hold the left mouse button, and drag in the video area to draw a
temperature area. Right-click to finish the area selected.
4.
Click
Apply
, the message “Apply success” is displayed, the temperature area is set
successfully.
Delete a temperature area
:
1.
Select an area ID.
2.
Click the temperature area and right-click.
3.
Remove the tick of area ID.
4.
Click
Apply
, the message “Apply success” is displayed, the temperature area is
deleted successfully.
Step 4
Click
Apply
.
Step 5
The message "Apply success" is displayed, the system saves the settings.
----End
