Intellipure 950P
5
Receiving and Storage
RECEIVING
Your unit has been carefully packed to avoid damage in shipping and storage. Equipment is prepared for shipment in
accordance with the Uniform Freight Classification. It is thoroughly inspected at the factory and barring damage in
transit, should be received in good condition.
When a freight carrier signs the Intellipure bill of lading, the carrier accepts the responsibility for any subsequent
shortages or damage evident or concealed. Inspection by the carrier of damage evident or concealed must be
requested. Evident shortage or damage should be noted on the carrier’s delivery document before signature of
acceptance. Claims must be made against the carrier by the purchaser.
Filtration systems are shipped as fully assembled filter units.
STORAGE
Store it in a dry place protected against moisture, dust, physical damage, weather, corrosion and excessive heat/cold.
Must install the Prefilter and V-Bank Main Filter before turning on the unit.
Safety Precautions
This symbol will be used throughout this manual to indicate safety
checkpoints. Failure to heed these warnings and notices may result
in damage to the unit and/or injury to personnel.
SAFETY PRECAUTIONS
Personnel, who will operate this system, or those who will perform maintenance thereon, must be given all manuals and
other instructions regarding safe operation of the filtration system.
The appliance is not to be used by persons (including children) with reduced physical, sensory, or mental capabilities, or
lack of experience and knowledge, unless they have been given supervision or instruction.
Children being supervised are not to play with the appliance.
This manual contains general recommendations, but specific requirements may apply to individual
installations. Such requirements are outlined in federal, state, and local codes. Compliance with
applicable codes and strict adherence to these installation instructions are the sole responsibility of the user.
