IntelliSAW IRM-48 Reader
Installation Manual
Page 12 of 28
IRM-48 Reader
910.00371.0001
3.2
D
IMENSIONS
The IRM-48 instrument has dimensions of 81 H × 142.5 W x 51.5 mm D (3.19 H × 5.61 W ×
2.03 in D).
Figure 5: IRM-48 Dimensions (in mm)
3.3
D
IN
R
AIL
M
OUNTING
CAUTION
ENSURE THE INSIDE OF THE PANEL IS WITHIN THE READER
’S OPERATING
TEMPERATURE AND THAT THERE IS ADEQUATE AIR FLOW TO PREVENT
OVERHEATING.
The IRM-48 Reader is mounted on standard 35 mm din rail. It can be mounted either vertically
or horizontal by changing the orientation of the mounting clip.
The din rail mounting clip is located on the back of the IRM-48 Reader and is screwed on to the
frame. The clip is normally oriented for vertical installation of the reader on to a din rail. To
change the installation mounting orientation, remove the 2 screws holding the mounting clip to
the frame of the reader. Once removed, turn the mounting clip 90 degrees in the desired
direction and screw on the mounting clip to the two additional tapped holes on the frame of the
reader.