11
If so, the system usually has no need to do single pixel correction.
The camera running built-in calibration mechanism can do calibration anytime. Besides, it is
normal when you hear some “click” noise during calibration.
3.2.3.
Auto imaging mode setup
Setup
: Press
MENU
button until
Auto: XXX
is activated, press
UP
button
or
DOWN
button
to
select needed mode.
Exit: Press
MENU
button until
Exit:
option is selected and press
UP
button or
DOWN
button
to exit.
.
Note:
There are three modes:
Auto 0
: Manual gain, manual brightness. The camera will not adjust brightness and gain
automatically according to the observed object.
Auto 1
: Manual gain, auto brightness. The camera adjusts brightness automatically according
to the observed object and you may adjust gain manually.
Auto 2
: Auto gain, auto brightness. The camera can adjust both brightness and gain
automatically according to the observed object.
3.2.4.
Imaging mode selection
Setup
: Press
MENU
button until
Mode: XXX
is activated and press
UP
button
or
DOWN
button
to select needed mode.
Exit: Press
MENU
button until
Exit:
option is selected and press
UP
button or
DOWN
button
to exit.
Note:
The camera has ten modes under
Auto
: XXX mode, where 0,1 are fixed factory default and
2
～
9 are user-defined. Herein, user can only choose the mode but not able to adjust.
