ITC-BT
QUICKSTART GUIDE
Bluetooth Cellular Gateway
_ Bluetooth enabled cellular phone required
_ XLink can be placed upright with stand or lay flat
_ Pair up to 3 cellular phones to your XLink
Each line
[
•
], [
••
], or [
•••
]
pairs to one cellular phone
_ Once paired, your cellular phone and your XLink will
automatically connect via Bluetooth when in range
_ To disconnect your cellular phone from XLink simply
press the blue appropriate line button
_ To re-connect your cellular phone to XLink on the same
line, simply press the same button and the light will
return to steady blue
_ XLink ITC-BT is designed to work with your standard
phone independently of your telephone service
NOTES
TELEPHONE CORD
CONNECTION
(to main home phone)
LINE #1
POWER
INDICATOR
LINE #2
•
••
•••
LINE #3
POWER ADAPTER
CONNECTION
USB CONNECTION
OUTLETS
ITC-BT
Made in China
Copyright © IntelliTouch
XLink is a registered
Trademark of IntelliTouch.
All rights reserved.
For customer service contact
your point of sale or visit:
www.intellitouch.com
IntelliTouch
San Diego CA, 92121
POWER SUPPLY
TELEPHONE
TELEPHONE CORD
HANDS-FREE
HANDS-FREE
HANDS-FREE
SET-UP
STEP 1
Plug-in & Connect
Plug power adapter from wall outlet
into XLink
Connect support stand to XLink
Plug telephone cord from main home
telephone into XLink
Pair Cellular Phone to XLink
STEP 2
Ready for Pairing
Select line [
•
], [
••
], or [
•••
] on XLink
Press and hold down
button for selected
line until blue button
light blinks quickly
Typical Pairing
- Select “Hands Free”
- Select “Look For Devices”
- Select “XLink Gateway”
- Select “Yes” and pair with XLink
- Enter password “1234”
- Press “OK”
Enable your Blue Tooth function on your
cellular phone (refer to your cellular
phone’s manual if necessary)
steps may
differ per model
STEP 3
YOUR
CONNECTED!
YOUR
CONNECTED!
Blue light stops blinking and remains on
when cellular and selected XLink line are
paired successfully
Enter password “1234” into your cellular
phone.
Press OK
