InTemp CX600 Dry Ice/CX700 Cryogenic Logger Manual
www.prosensor.com
4
3.
Tap Set Logger Passkey.
4.
Type a passkey up to 10 characters.
5.
Tap Save.
6.
Tap Disconnect.
Only the phone or tablet used to set the passkey can then
connect to the logger without entering a passkey; all other
mobile devices will be required to enter the passkey. For
example, if you set the passkey for the logger with your tablet
and then try to connect to the device later with your phone,
you will be required to enter the passkey on the phone but not
with your tablet. Similarly, if othe
rs attempt to connect to the
logger with different devices, th
en they would also be required
to enter the passkey. To reset a passkey, connect to the logger,
tap Set Logger Passkey, and select Reset to Factory Default.
Downloading the Logger
You can download the logger to a phone or tablet and generate
reports that include logged data
and alarm information.
Reports can be shared immediately upon download or accessed
later in the InTemp app.
InTempConnect users:
Privileges are required to download,
preview, and share reports in the InTemp app. Report data is
automatically u
ploaded to InTempConnect when you download
the logger. Log in to InTempConnect to build custom reports
(requires privileges). In a
ddition
, InTempConnect users can also
download CX logge
rs automatically
on a regular basis using the
CX5000 Gateway. Or, if the logger
was configured with a logger
profil
e in which InTempVerify was enabled, then anyone can
download the logger with the InTempVerify app. For details on
the gateway and InTempVerify, see www.intempconnect/help.
To download the logger with the InTemp app:
1.
Press the button on the logger t
o wake it up.
2.
Tap the Devices icon and connect to the logger.
3.
Tap Download.
4.
Choose a downlo
ad option:
Important:
CX602 and CX702 loggers cannot be
restarted. If you want a CX602 or CX702 logger to
con
ti
nue logging
aft
er the download is complete, select
Download & Continue.
•
Download & Co
ntinu
e. The logger will
continu
e logging
once the download is complete.
•
Download & Restart (CX603 models only). The logger will
start a new data set using
the same profile once the
download is complete. Note that if the logger was
originally
configured with a pu
s
h button start, you must
push the
start button for logging to restart.
•
Download & Stop. The logger will stop logging once the
download is complete.
A report of the download is generated and is also uploaded to
InTempConnect if you are logged in to the InTemp app with
your InTempConnect user creden
ti
als.
In the app, tap Settings to ch
ange the default report type
(Secure PDF or XLSX) and report
sharing options.
The report is
also available in in both formats for sharing at a later time. Tap
the Reports icon to access previously downloaded reports. See
www.intempconnect.com/help for details on working with
reports in both the InTemp app and InTempConnect.
Logger Events
The logger records the following events to track logger
ope
ration and s
tatus. These events are listed in reports
downloaded from the logger.
Event Name
Definition
Configur
ed
The logger was co
nfigur
ed by a user.
Connected
The logger was connected to the InTemp
app.
Started
The logger started logging.
Stopped
The logger stopped logging.
Downloaded
The logger was downloaded.
Alarm Out of
Range/In Range
An alarm has occurred because the reading
was outside the alarm limits or back within
range.
Note:
Although the reading may
return to a normal range, the alarm
indicator will not clear in the InTemp app
and the alarm LED will con
ti
nue to blink.
Safe Shutdown
The battery
level dropped below a safe
oper
atin
g voltage and performed a safe
shutdown.
Deploying the Logger
Use the mounting loop on the logger to secure it to a shipment
or other application you are mo
nitoring. You can also remove
the backing on the tape that is adhered to the to
p and bottom
of the logger to
mount it on a flat surface
.
Place the stainless steel probe in
the plastic clip i
ncluded with
the logger and clip it to a box or other item.
The external probe cable has a protec
ti
ve sheath. Move the
sheath as needed to posi
tion
it where the cable will be
protected during shipments from inadvertent cuts.
Protecting the Logger
Note:
Static electricity may cause the logger to stop logging.
The logger has been tested to 8 KV, but avoid electr
ostati
c
discharge by grounding yourself to protect the logger. For more
information, s
e
arch for “static d
ischarge” on onsetcomp.com.
Battery Information
The logger uses
one CR2450 non-replaceable lithium battery.
Batt
ery life is not guaranteed past the 1-year logger shelf life.
Battery life for the CX603 and
CX703 models is 1 year, typical
with a logging interval of 1 minute. Expected ba
tt
ery life for the
CX603 and CX703 models vary based on the ambient
temperature where the logger is deployed and the frequency of
connections, downloads, and p
aging. Deployments in extremely
cold or hot temperatures or a logging interval faster than 1
minute can impact battery life. Estimates are n
ot guaranteed
due to uncer
tainti
es
in initi
al ba
tt
er
y conditions and op
er
atin
g
environment.
