Manual Intend Stiffmaster - 2
Construction:
The Intend Stiffmaster is a special headset, which improves the stiffness of your 1 1/8“
steerer tube.
Technical specs:
44mm
framediameter (ZS44)
28,6mm
steerertubediameter
14mm
stackheight (+ spacer)
73g
incl. titanbolt
1x
M4x16mm
Bolt
3mm
allen key
Torque:
The maximum torque of the clamping bolt is
3 Nm
.
Bearings:
1x 6806 2RS – 30 x 42 x 7mm
1x AXK 3047
2x AS 3047
Installing:
Please do not DISASSEMBLE the headset before installing. If the headset is
assembled wrong, the seal can get damaged and I have to send a new one – of
course we should avoid this.
For installing the Stiffmaster it is not necessary to disassemble the headset unit. The
bearings are strong enough to withstand the pressing force.
Please add a small amount of grease (doesn’t matter which kind of grease) in the frame
or the headset and press in the headset carefully with a soft-hammer or a special
headset tool.
