DG200 Series
User’s Guide
28
Port Triggering
The feature is similar to the virtual server, but provides a more secure way to provide your
device. It opens up the port hole temporary and allows CPE in LAN to establish a connection
with remote parties. Those ports are open only if a specified request from a PC in LAN is
received, and then the device allows the remote parties to access to establish a connection
with that PC in LAN.
Figure 35: Port Triggering Setup
Click
Add
to add a rule of port triggering.
Figure 36: Add Rule Of Port Triggering
Global Setting
Select the WAN Interface from the list which applies to this rule.
Select a
service
from the predefined list or enter the name of
Custom Server
Enter the
Server IP Address
located in the LAN to provide the service to remote party
Enter the
Start Trigger Port #
and
End Trigger Port #
that open to remote to access the
service
Select the
Trigger Protocol
Enter the
Start Open Port #
and
End Open Port #
that may use different port # to secure
the service. If you use the same port # as
Trigger port #
, please leave
Open Port #
as
blank.
