DG200 Series
User’s Guide
30
Click
Add
to add a rule of Outgoing IP Filtering.
Check
Remove
and click
Remove
to remove the specified entry.
Figure 39: Add - Outgoing IP Filter Setup
Global Setting
Enter the
Filter Name
Select the
Protocol
from the selection list.
Enter the
Source IP Address
and
Subnet Mask (range of IP addresses)
of packet
Enter the
one port or multi ports
(port range)
Enter the
Destination IP Address
and
Subnet Mask (range of IP addresses)
of packet
Enter the
one port or multi ports
(port range)
Click
Save/Apply
By default, all incoming IP packets from WAN are blocked to access PCs in LAN, but some IP
packets can be accepted by setting up filters.
Figure 40: Incoming IP Filter Setup
